一、產品介紹 DESCRIPTION

漆霧凝聚劑一般分為A、B兩劑組成，A劑是分解及去除各類漆粘性，主要成份有機高分子聚合物，適合在噴漆房循環水系統中添加，分解去除殘漆粘性，同時將水中油漆重金屬去除，并控制循環水生物活性，使循環水不易產生惡臭，同時可降低COD含量及廢水處理成本。B劑是一種特殊高分子聚合物，可將除去粘性的漆渣凝聚懸浮達到上浮之效果，便于去除。

The paint mist coagulant is generally divided into two agents, A and B. Agent A is used to decompose and remove various paint viscosity. The main component is organic high molecular polymer. It is suitable for adding in the circulating water system of the spray booth to decompose and remove the residual paint viscosity. Remove heavy metals from paint in the water and control the biological activity of the circulating water, so that the circulating water is not prone to odor, and at the same time it can reduce the COD content and waste water treatment costs. Agent B is a special high-molecular polymer that can coagulate and suspend the viscous paint residue to achieve a floating effect, which is easy to remove.

二、應用范圍 APPLICATION

主要應用于機械制造行業涂裝噴漆過程中的循環廢水處理。

Mainly used in the recycling wastewater treatment in the painting and spraying process of the machinery manufacturing industry.

三、質量指標 QUALITY

四、使用方法 INSTRUCTIONS

1、建議未使用前先清槽換水，換水后先用氫氧化鈉調整水質控制PH值在8-10，同時加完漆霧凝聚劑A，B劑之后整體循環水的PH能在7-8。

2、換水后上午加漆霧凝聚劑A劑在噴房抽水馬達處，加好后照常生產和噴漆，在下班前加漆霧凝聚劑B劑在即聚漆槽，下班后打撈懸浮漆渣即可。

3、A劑和B劑的添加比例為1比1，實際用量需根據現場情況調整。

4、可人工添加或計量添加泵自動添加，根據過噴漆量的大小來調整計量泵的液流速度與排量大小。

1. It is recommended to clean the tank and change the water before use. After changing the water, adjust the water quality with sodium hydroxide to control the PH value of 8-10. At the same time, after adding the paint mist coagulant A and B, the pH of the overall circulating water can be 7 -8.

2. In the morning after changing the water, add paint mist coagulant agent A at the pumping motor of the spray room. After adding it, produce and spray as usual. Add paint mist coagulant agent B in the paint tank before get off work, and remove the suspended paint residue after work. Can.

3. The addition ratio of A and B is 1:1, and the actual dosage needs to be adjusted according to site conditions.

4. It can be added manually or automatically added by the metering pump, and the liquid flow speed and displacement of the metering pump can be adjusted according to the amount of overspray.

五、儲存和包裝 STORAGE&PACKAGING

1、本產品應儲存于陰涼處，避免陽光直射，A劑保質期為6個月，B劑保質期1個月。

2、本產品用25KG、50KG或1000KG塑料桶包裝。

1. This product should be stored in a cool place and avoid direct sunlight. The shelf life of agent A is 6 months, and the shelf life of agent B is 1 month.

2. This product is packed in 25KG, 50KG or 1000KG plastic drums.